What is the setting range of Mazak parameter E11?

0 to 40 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E11

Axial interference clearance of chamfering cutter

Q: What does Mazak parameter E11 do?

E11 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Axial interference clearance of chamfering cutter. The amount of clearance that prevents interference of the chamfering cutter with the bottom during chamfering Interference depth

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The amount of clearance that prevents interference of the chamfering cutter with the bottom during chamfering Interference depth

Setting

Setting range0 to 40

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 23, 138. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →