What is the setting range of Mazak parameter E112?

0 to 99999 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E112

Maximum wall avoidance distance in intelligent pocket milling (IPM) machining

Q: What does Mazak parameter E112 do?

E112 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Maximum wall avoidance distance in intelligent pocket milling (IPM) machining. Set the maximum distance to avoid the wall in intelligent pocket milling (IPM) machining. In intelligent pocket milling (IPM) machining, when a tool passes the wall already machined again, tool movement to avoid the wall is performed using the set distance as the maximum avoidance distance.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the maximum distance to avoid the wall in intelligent pocket milling (IPM) machining. In intelligent pocket milling (IPM) machining, when a tool passes the wall already machined again, tool movement to avoid the wall is performed using the set distance as the maximum avoidance distance.

Setting

Setting range0 to 99999

Unit0.001 mm/0.0001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 27, 166. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →