What is the setting range of Mazak parameter E113?

0 to 99999 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E113

Bottom face avoidance distance/clearance for recovering surface speed in plane machining

Q: What does Mazak parameter E113 do?

E113 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Bottom face avoidance distance/clearance for recovering surface speed in plane machining. In intelligent pocket milling (IPM), when a tool passes the already-machined bottom face again, tool movement to avoid the bottom face is implemented using the set distance as the avoidance distance. During helical approach for plane machining in end milling-mountain, pocket milling, pocket milling-mountain, and pocket milling-valley units, the tool moves the set distance away from the hole bottom and changes its surface speed after the helical approach to the hole bottom. (*) * This parameter is valid when E141 bit 5 = 0 and E43 > 0.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

In intelligent pocket milling (IPM), when a tool passes the already-machined bottom face again, tool movement to avoid the bottom face is implemented using the set distance as the avoidance distance. During helical approach for plane machining in end milling-mountain, pocket milling, pocket milling-mountain, and pocket milling-valley units, the tool moves the set distance away from the hole bottom and changes its surface speed after the helical approach to the hole bottom. (*) * This parameter is valid when E141 bit 5 = 0 and E43 > 0.

Setting

Setting range0 to 99999

Unit0.001 mm/0.0001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 27, 167. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →