What is the setting range of Mazak parameter E115?

5 to 50. A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E115

Magnification factor of the minimum arc of trochoid cycle in intelligent pocket milling (IPM) machining

Q: What does Mazak parameter E115 do?

E115 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Magnification factor of the minimum arc of trochoid cycle in intelligent pocket milling (IPM) machining. Set the magnification factor of the minimum arc of trochoid cycle in intelligent pocket milling (IPM) machining.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the magnification factor of the minimum arc of trochoid cycle in intelligent pocket milling (IPM) machining.

Setting

Setting range5 to 50

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 27, 167. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →