Amount of overlapping in groove expanding operation in the end milling-slot unit

Q: What does Mazak parameter E129 do?

E129 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Amount of overlapping in groove expanding operation in the end milling-slot unit. Set the amount of overlapping for expanding the groove width in the end milling-slot unit.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the amount of overlapping for expanding the groove width in the end milling-slot unit.

Setting

Setting range0 to 9

Unit10%

Program typeM

Takes effect—

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 27, 167. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →