What is the setting range of Mazak parameter E13?

1 to 9 (unit: 10%). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E13

Tool path setting element for end milling-top unit

Q: What does Mazak parameter E13 do?

E13 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Tool path setting element for end milling-top unit. Element used to set the tool path internal to the figure for end milling-top unit Example : Tool diameter ×

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Element used to set the tool path internal to the figure for end milling-top unit Example : Tool diameter ×

Setting

Setting range1 to 9

Unit10%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 23, 138. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →