PARAMUser parameter · LINE/FACE/3D (E)
E133
Surface speed change position in helical approach
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Surface speed change position in helical approach
When a helical approach is set, the tool changes its surface speed to the value set in the tool sequence after moving the distance set for parameter E133 away from the hole bottom. * This parameter is valid when E141 bit 5 = 1
Setting
Setting range0 to 999
Unit0.1 mm/0.01 in
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 27, 169. Reference and explanation only — not a reproduction of the manual.