What is the setting range of Mazak parameter E16?

1 to 20 (unit: 10%). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E16

Peripheral-cutting feed rate override for end milling-mountain unit

Q: What does Mazak parameter E16 do?

E16 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Peripheral-cutting feed rate override for end milling-mountain unit. Override value of the idle-cutting feed rate at which tool of end milling- mountain unit is to be moved around the outer form of the workpiece Note : Valid only when bit 0 of E91 is 1 and its bit 7 is 0. Example :

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Override value of the idle-cutting feed rate at which tool of end milling- mountain unit is to be moved around the outer form of the workpiece Note : Valid only when bit 0 of E91 is 1 and its bit 7 is 0. Example :

Setting

Setting range1 to 20

Unit10%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 139. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →