What is the setting range of Mazak parameter E17?

0 to 9 (unit: 10%). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E17

Axial-cutting feed rate override

Q: What does Mazak parameter E17 do?

E17 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Axial-cutting feed rate override. Override value of the feed rate at which the tool of a line- or face-machining unit (excluding face milling unit) is to be moved to the machining surface in an axial direction Note : 1. Valid only when ZFD (or AFD) of tool sequence is G01. 2. Feed overriding is invalid when this parameter is 0. Example :

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Override value of the feed rate at which the tool of a line- or face-machining unit (excluding face milling unit) is to be moved to the machining surface in an axial direction Note : 1. Valid only when ZFD (or AFD) of tool sequence is G01. 2. Feed overriding is invalid when this parameter is 0. Example :

Setting

Setting range0 to 9

Unit10%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 139. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →