What is the setting range of Mazak parameter E18?

0 to 9 (unit: 10%). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E18

Override in case of the overall width cutting for pocket-machining

Q: What does Mazak parameter E18 do?

E18 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Override in case of the overall width cutting for pocket-machining. Override value of feed rate when the pocket-machining radial depth-of-cut becomes equal to the tool diameter Example : Note : Overriding for overall width cutting is not valid when this parameter is 0. [Applicable units] Rough-machining of POCKET, PCKT MT, PCKT VLY and STEP

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Override value of feed rate when the pocket-machining radial depth-of-cut becomes equal to the tool diameter Example : Note : Overriding for overall width cutting is not valid when this parameter is 0. [Applicable units] Rough-machining of POCKET, PCKT MT, PCKT VLY and STEP

Setting

Setting range0 to 9

Unit10%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 139. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →