PARAMUser parameter · LINE/FACE/3D (E)
E19
Returning feed rate override in case of bidirectional cutting for rough-machining of the end milling-slot unit.
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Returning feed rate override in case of bidirectional cutting for rough-machining of the end milling-slot unit.
Override value of tool returning feed rate in the rough-machining process of the end milling-slot unit, when the bidirectional cutting is executed. Note : The override value is invalid, when bit 5 of parameter E96 is set to OFF, or this parameter is set to 0. [Applicable unit] Returning path in rough-machining of SLOT
Setting
Setting range0 to 999
Unit%
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 140. Reference and explanation only — not a reproduction of the manual.