What is the setting range of Mazak parameter E20?

0 to 40 (unit: 10%). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E20

Axial cutting feed override during Z-axial cutting in the pecking mode of face machining

Q: What does Mazak parameter E20 do?

E20 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Axial cutting feed override during Z-axial cutting in the pecking mode of face machining. This parameter indicates the feed override value for axial pecking movement to the surface to be machined using a face-machining unit excepting a face milling unit. Feed rate during pecking operation = FR × Note : 1. Valid only when G01 or a numeric value is set for ZFD (or AFD) and [PECKING] is selected for TYPE in the tool sequence. 2. The feed override function is invalid when “0” is assigned to this parameter.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

This parameter indicates the feed override value for axial pecking movement to the surface to be machined using a face-machining unit excepting a face milling unit. Feed rate during pecking operation = FR × Note : 1. Valid only when G01 or a numeric value is set for ZFD (or AFD) and [PECKING] is selected for TYPE in the tool sequence. 2. The feed override function is invalid when “0” is assigned to this parameter.

Setting

Setting range0 to 40

Unit10%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 140. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →