What is the setting range of Mazak parameter E23?

1 to 99 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E23

Effective removal allowance (upper limit) of automatic corner overriding

Q: What does Mazak parameter E23 do?

E23 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Effective removal allowance (upper limit) of automatic corner overriding. The range of removal allowances (upper and lower limits) The automatic corner overriding becomes valid when the following line- or face-machining conditions are met:

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The range of removal allowances (upper and lower limits) The automatic corner overriding becomes valid when the following line- or face-machining conditions are met:

Setting

Setting range1 to 99

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 141. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →