What is the setting range of Mazak parameter E24?

1 to 99 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E24

Effective removal allowance (lower limit) of automatic corner overriding

Q: What does Mazak parameter E24 do?

E24 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Effective removal allowance (upper limit) of automatic corner overriding. The range of removal allowances (upper and lower limits) The automatic corner overriding becomes valid when the following line- or face-machining conditions are met:

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Effective removal allowance (upper limit) of automatic corner overriding

The range of removal allowances (upper and lower limits) The automatic corner overriding becomes valid when the following line- or face-machining conditions are met:

Setting

Setting range1 to 99

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 141. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →