What is the setting range of Mazak parameter E26?

0 to 999 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E26

Calculation coefficient for the finishing feed of line milling

Q: What does Mazak parameter E26 do?

E26 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Calculation coefficient for the finishing feed of line milling. Axial feed rate calculation parameter for a line milling finish. Set the changing ratio of the axial feed rate with respect to the radial feed rate. Axial feed rate = Radial feed rate ×

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Axial feed rate calculation parameter for a line milling finish. Set the changing ratio of the axial feed rate with respect to the radial feed rate. Axial feed rate = Radial feed rate ×

Setting

Setting range0 to 999

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 141. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →