PARAMUser parameter · LINE/FACE/3D (E)
E28
Finishing feed rate calculation reference feed rate in line machining unit
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Radial direction feed rate calculation reference diameter for finish cutting in line machining unit
These parameters, the roughness code, etc. determine the finishing feed rate. If the radial-finishing feed rate is taken as F, then: E28 × × Kf × Z (D < E27 × ) E28 × Kf × Z (D E27 × ) : 0.1 (for metric specs.) or Kf : Roughness coefficient (Refer to the list below) Roughness Roughness Roughness code f code f code f 1 0 4 0 7 0 K × 0.8–2 K × 0.8 K × 0.84 2 5 8 K × K × K × 3 0 6 0 9 0
Setting
Setting range0 to 65535
Unit—
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 142. Reference and explanation only — not a reproduction of the manual.