PARAMUser parameter · LINE/FACE/3D (E)
E29
Selection of whether the cutting conditions in the shape sequence during VFC mode are to be modified
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Selection of whether the cutting conditions in the shape sequence during VFC mode are to be modified
Select whether the cutting conditions in the shape sequence during VFC mode are to be modified. The selection is valid only for milling. 0: Modification of the cutting conditions in the shape sequence 1: No modification of the cutting conditions in the shape sequence In the case of 0, only the cutting conditions in the tool sequence are modified. In the case of 1, both the cutting conditions in the tool sequence and the cutting conditions in the shape sequence are modified.
Setting
Setting range0, 1
Unit—
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 142. Reference and explanation only — not a reproduction of the manual.