PARAMUser parameter · LINE/FACE/3D (E)
E30
An element that determines the starting point and escape point of radial cutting when CLOSED is specified for the wall attributes at the starting point and ending point of open-pattern line machining
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Radial clearance for wall attributes during line machining
An element that determines the starting point and escape point of radial cutting when CLOSED is specified for the wall attributes at the starting point and ending point of open-pattern line machining. When OPEN is specified, E2 is used. <CLOSED specified> <OPEN specified>
Setting
Setting range0 to 999
Unit0.1 mm/0.01 in
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 143. Reference and explanation only — not a reproduction of the manual.