What is the setting range of Mazak parameter E31?

0 to 9 (unit: 10%). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E31

Element that determines the amount of OPEN attribute wall protrusion in pocket-machining shape units

Q: What does Mazak parameter E31 do?

E31 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Element that determines the amount of OPEN attribute wall protrusion for pocket-machining shape units. Element that determines the amount of OPEN attribute wall protrusion in pocket-machining shape units (POCKET, PCKT MT or PCKT VLY unit only) Protrusion Note : Nominal tool diameter in the tool sequence is used when tool data is absent.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Element that determines the amount of OPEN attribute wall protrusion for pocket-machining shape units

Element that determines the amount of OPEN attribute wall protrusion in pocket-machining shape units (POCKET, PCKT MT or PCKT VLY unit only) Protrusion Note : Nominal tool diameter in the tool sequence is used when tool data is absent.

Setting

Setting range0 to 9

Unit10%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 143. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →