PARAMUser parameter · LINE/FACE/3D (E)
E32
Element used for automatically determining the approach radius in a Z-direction helical approach
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Element used for automatically determining the approach radius in a Z-direction helical approach
The approaching radius value to be used in the Z-direction helical approach scheme for helical machining is automatically determined by the parameter as follows: Approaching radius = For helical approach (Helical circle 2 + 1/4) Clearance Z Cutting allowance Z [Related parameters] E40, E41
Setting
Setting range1 to 999
Unit%
Program typeM
Takes effectAfter stop of movement
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 144. Reference and explanation only — not a reproduction of the manual.