What is the setting range of Mazak parameter E33?

1 to 999 (unit: %). A changed value takes effect: After stop of movement.

PARAMUser parameter · LINE/FACE/3D (E)

E33

Element used for automatically determining the amount of in-feed per revolution in the Z-axis direction in a Z-direction helical approach

Q: What does Mazak parameter E33 do?

E33 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Element used for automatically determining the amount of in-feed per revolution in the Z-axis direction in a Z-direction helical approach. The amount of in-feed per revolution in the Z-axis direction in a Z-direction helical approach is automatically determined using the parameter setting as follows. Amount of in-feed in the Z-axis direction =  For helical approach (Helical circle 2 + 1/4) Clearance Z Cutting allowance Z [Related parameters] E40, E41

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The amount of in-feed per revolution in the Z-axis direction in a Z-direction helical approach is automatically determined using the parameter setting as follows. Amount of in-feed in the Z-axis direction =  For helical approach (Helical circle 2 + 1/4) Clearance Z Cutting allowance Z [Related parameters] E40, E41

Setting

Setting range1 to 999

Unit%

Program typeM

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 144. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →