What is the setting range of Mazak parameter E34?

1 to 999 (unit: %). A changed value takes effect: After stop of movement.

PARAMUser parameter · LINE/FACE/3D (E)

E34

Element that automatically determines an approaching distance in a Z-direction tapered approach scheme

Q: What does Mazak parameter E34 do?

E34 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Element that automatically determines an approaching distance in a Z-direction tapered approach scheme. The approaching distance value to be used in a Z-direction tapered approach scheme for tapered machining is automatically determined by the parameter as follows: Approaching distance =  For tapered approach (3 tapers)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The approaching distance value to be used in a Z-direction tapered approach scheme for tapered machining is automatically determined by the parameter as follows: Approaching distance =  For tapered approach (3 tapers)

Setting

Setting range1 to 999

Unit%

Program typeM

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 145. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →