What is the setting range of Mazak parameter E37?

0 to 99999999 (unit: 0.001 mm/0.0001 in). A changed value takes effect: After stop of movement.

PARAMUser parameter · LINE/FACE/3D (E)

E37

The amount of return of pecking in the Z-axial pecking mode of face machining

Q: What does Mazak parameter E37 do?

E37 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Amount of return of pecking in the Z-axial pecking mode of face machining. This parameter indicates the amount of return of pecking in the Z-axial pecking mode of face machining.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Amount of return of pecking in the Z-axial pecking mode of face machining

This parameter indicates the amount of return of pecking in the Z-axial pecking mode of face machining.

Setting

Setting range0 to 99999999

Unit0.001 mm/0.0001 in

Program typeM

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 146. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →