What is the setting range of Mazak parameter E38?

0 to 9999. A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E38

The returning feed rate of pecking in the Z-axial pecking mode of face machining

Q: What does Mazak parameter E38 do?

E38 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Returning feed rate of pecking in the Z-axial pecking mode of face machining. Set the returning feed rate of the pecking in the Z-axial pecking mode during the face machining. Note : This value will be handled as100 if 0 is set here.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Returning feed rate of pecking in the Z-axial pecking mode of face machining

Set the returning feed rate of the pecking in the Z-axial pecking mode during the face machining. Note : This value will be handled as100 if 0 is set here.

Setting

Setting range0 to 9999

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 146. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →