What is the setting range of Mazak parameter E39?

1 to 100 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E39

Element that automatically determines the depth-of-cut-R (Pocket milling, Pocket milling-mountain, Pocket milling-valley, End milling-slot)

Q: What does Mazak parameter E39 do?

E39 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Element that automatically determines the depth-of-cut-R (Pocket milling, Pocket milling-mountain, Pocket milling-valley, End milling-slot). Set the element that automatically determines the depth-of-cut-R of tool sequence in the pocket milling, pocket milling-mountain, pocket milling-valley and end milling-slot units. * This parameter is valid only when intelligent pocket milling (IPM) (CW/CCW) is selected for the tool sequence method. Depth-of-cut-R = NOM-  E39/100

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the element that automatically determines the depth-of-cut-R of tool sequence in the pocket milling, pocket milling-mountain, pocket milling-valley and end milling-slot units. * This parameter is valid only when intelligent pocket milling (IPM) (CW/CCW) is selected for the tool sequence method. Depth-of-cut-R = NOM-  E39/100

Setting

Setting range1 to 100

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 146. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →