What is the setting range of Mazak parameter E43?

1 to 100 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E43

Magnification factor of surface speed in helical approach

Q: What does Mazak parameter E43 do?

E43 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Magnification factor of surface speed in helical approach. Set the magnification factor of surface speed in helical approach. Surface speed during helical approach = Surface speed in tool sequence  E43/100 * If a value outside the setting range is set, E43 = 100 is assumed.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the magnification factor of surface speed in helical approach. Surface speed during helical approach = Surface speed in tool sequence  E43/100 * If a value outside the setting range is set, E43 = 100 is assumed.

Setting

Setting range1 to 100

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 24, 147. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →