What is the setting range of Mazak parameter E5?

0 to 999 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

Element used to set the cutting start point and escape point (the second clearance)

Q: What does Mazak parameter E5 do?

E5 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Element used to set the cutting start point and escape point (the second clearance). Element used to set the cutting start point and escape point (the second clearance) E2 is used generally as a clearance on the X-Y plane, however, E5 is used when the condition meets both of 1. and 2. mentioned below. 1. There is pre-machining in the same unit. 2. The parameter (E91 to E95) that makes E5 effective is set to ON (1). [Applicable units] LINE OUT, LINE IN, STEP, POCKET, POCKT MT, PCKT VLY [Related parameters] E91 bit 3, E92 bit 3, E93 bit 3, E94 bit 3, E95 bit 7 * Parameter that effectuates E5 in the applicable unit.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Element used to set the cutting start point and escape point (the second clearance) E2 is used generally as a clearance on the X-Y plane, however, E5 is used when the condition meets both of 1. and 2. mentioned below. 1. There is pre-machining in the same unit. 2. The parameter (E91 to E95) that makes E5 effective is set to ON (1). [Applicable units] LINE OUT, LINE IN, STEP, POCKET, POCKT MT, PCKT VLY [Related parameters] E91 bit 3, E92 bit 3, E93 bit 3, E94 bit 3, E95 bit 7 * Parameter that effectuates E5 in the applicable unit.

Setting

Setting range0 to 999

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 23, 136. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →