What is the setting range of Mazak parameter E55?

0 to 9 (unit: 10%). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E55

3-D Axial cutting-feed overriding

Q: What does Mazak parameter E55 do?

E55 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). 3-D Axial cutting-feed overriding. Feed overriding for cutting a workpiece in an axial direction using a 3-D unit E xample: High-speed rough processing Finish processing Note : Feed overriding is invalid when this parameter is 0.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Feed overriding for cutting a workpiece in an axial direction using a 3-D unit E xample: High-speed rough processing Finish processing Note : Feed overriding is invalid when this parameter is 0.

Setting

Setting range0 to 9

Unit10%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 147. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →