What is the setting range of Mazak parameter E56?

0, 1. A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E56

3-D, Inversion check of curved-surface pattern

Q: What does Mazak parameter E56 do?

E56 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). 3-D Inversion check of curved-surface pattern. This parameter is used to select whether or not an alarm message is to be displayed if the curved surface of a defined pattern points in the – Z direction (normally, processing becomes impossible). 0: No alarm 1: Alarm Example : The curved surface of a +Z Note : This parameter is invalid during high-speed rough processing.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

3-D Inversion check of curved-surface pattern

This parameter is used to select whether or not an alarm message is to be displayed if the curved surface of a defined pattern points in the – Z direction (normally, processing becomes impossible). 0: No alarm 1: Alarm Example : The curved surface of a +Z Note : This parameter is invalid during high-speed rough processing.

Setting

Setting range0, 1

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 25, 147. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →