What is the setting range of Mazak parameter E57?

0, 1. A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E57

3-D, Severity check of cutting pitch

Q: What does Mazak parameter E57 do?

E57 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). 3-D Severity check of cutting pitch. This parameter is used to select whether or not processing is to be performed in strict accordance with the tool-sequence pitch data setting. 0: The pitch setting is not strictly observed. 1: The pitch setting is strictly observed. Note : 1. This parameter is invalid during high-speed rough processing. 2. The operation time becomes long if this parameter is set to 1.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

3-D Severity check of cutting pitch

This parameter is used to select whether or not processing is to be performed in strict accordance with the tool-sequence pitch data setting. 0: The pitch setting is not strictly observed. 1: The pitch setting is strictly observed. Note : 1. This parameter is invalid during high-speed rough processing. 2. The operation time becomes long if this parameter is set to 1.

Setting

Setting range0, 1

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 25, 148. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →