What is the setting range of Mazak parameter E58?

0, 1. A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E58

3-D, Tool-diameter compensation

Q: What does Mazak parameter E58 do?

E58 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). 3-D Tool-diameter compensation. This parameter is used to select whether or not 3-D tool-diameter compensation according to tool data is to be made for the curved surface of a defined pattern 0: Diameter compensation made 1: Diameter compensation not made Example : Pattern Diameter compensation Diameter compensation

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

3-D Tool-diameter compensation

This parameter is used to select whether or not 3-D tool-diameter compensation according to tool data is to be made for the curved surface of a defined pattern 0: Diameter compensation made 1: Diameter compensation not made Example : Pattern Diameter compensation Diameter compensation

Setting

Setting range0, 1

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 25, 148. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →