What is the setting range of Mazak parameter E59?

0 to 999 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E59

3-D, Allowance of axial-cutting start position

Q: What does Mazak parameter E59 do?

E59 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). 3-D Allowance of axial-cutting start position. Element used to set the position in which the cutting feed in axial direction is to be started after the tool has been moved from the initial point toward the workpiece at a rapid feed rate Example : Material height Normal-speed or high-speed

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

3-D Allowance of axial-cutting start position

Element used to set the position in which the cutting feed in axial direction is to be started after the tool has been moved from the initial point toward the workpiece at a rapid feed rate Example : Material height Normal-speed or high-speed

Setting

Setting range0 to 999

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 25, 148. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →