What is the setting range of Mazak parameter E6?

0 to 999 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

Reference allowance of finishing in axial direction

Q: What does Mazak parameter E6 do?

E6 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Reference allowance of finishing in axial direction. The reference value of each finishing allowance Z (FIN-Z) which is automatically set when the roughness levels of the line- or face-machining units have been set The finishing allowance Z in the case of roughness level 4 becomes the value of this parameter, and the values for all other roughness levels are calculated using the expressions listed in the table below. 6 E6 × 0.7 × 0.7 7 E6 × 0.7 × 0.7 × 0.7 8 E6 × 0.7 × 0.7 × 0.7 × 0.7 E6 × 0.7 × 0.7 × 0.7 × 0.7 × 0.7

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The reference value of each finishing allowance Z (FIN-Z) which is automatically set when the roughness levels of the line- or face-machining units have been set The finishing allowance Z in the case of roughness level 4 becomes the value of this parameter, and the values for all other roughness levels are calculated using the expressions listed in the table below. 6 E6 × 0.7 × 0.7 7 E6 × 0.7 × 0.7 × 0.7 8 E6 × 0.7 × 0.7 × 0.7 × 0.7 E6 × 0.7 × 0.7 × 0.7 × 0.7 × 0.7

Setting

Setting range0 to 999

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 23, 136. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →