What is the setting range of Mazak parameter E60?

0 to 999 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E60

3-D, Normal cutting allowance

Q: What does Mazak parameter E60 do?

E60 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). 3-D Normal cutting allowance. The 3-D finish processing (cutting) allowance in the direction of the normal with respect to the defined pattern of the curved surface Example :

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

3-D Normal cutting allowance

The 3-D finish processing (cutting) allowance in the direction of the normal with respect to the defined pattern of the curved surface Example :

Setting

Setting range0 to 999

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 25, 148. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →