What is the setting range of Mazak parameter E61?

0 to 999 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E61

3-D, Search length for parallel cutting

Q: What does Mazak parameter E61 do?

E61 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). 3-D Search length for parallel cutting. The length of a short line segment which determines the next approximation point for tool-path creation Depending on the tool-sequence selected: E61 is applicable for //-1 or //-2, or E62 is applicable for -1 or -2 This value will be handled as 0.1 mm (or 0.01 in) if 0 is set here.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

3-D Search length for parallel cutting

The length of a short line segment which determines the next approximation point for tool-path creation Depending on the tool-sequence selected: E61 is applicable for //-1 or //-2, or E62 is applicable for -1 or -2 This value will be handled as 0.1 mm (or 0.01 in) if 0 is set here.

Setting

Setting range0 to 999

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 25, 149. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →