What is the setting range of Mazak parameter E64?

0 to 999. A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

E64

3-D, Pattern display division segment (GL direction)

Q: What does Mazak parameter E64 do?

E64 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). 3-D Pattern display division segment (FL direction). The number of segments into which the defined pattern of a curved surface is to be divided for display of the curved-surface pattern on the TOOL PATH CHECK display Example : GL or normal to FL Note : This parameter is used for display of a curved-surface pattern, and thus the pattern displayed may slightly differ from the actual pattern of the curved surface to be machined.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

3-D Pattern display division segment (FL direction)

The number of segments into which the defined pattern of a curved surface is to be divided for display of the curved-surface pattern on the TOOL PATH CHECK display Example : GL or normal to FL Note : This parameter is used for display of a curved-surface pattern, and thus the pattern displayed may slightly differ from the actual pattern of the curved surface to be machined.

Setting

Setting range0 to 999

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 25, 149. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →