What is the setting range of Mazak parameter E9?

0 to 999 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · LINE/FACE/3D (E)

Allowance of axial-cutting start position (the first clearance)

Q: What does Mazak parameter E9 do?

E9 is a User parameter in the LINE/FACE/3D group of the MAZATROL SmoothX control (INTEGREX e-670H). Allowance of axial-cutting start position (the first clearance). Element used to set the position in which the cutting feed in axial direction is to be started after the line- or face-machining tool has been moved from the initial point toward the workpiece at a rapid feed rate Example :

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Element used to set the position in which the cutting feed in axial direction is to be started after the line- or face-machining tool has been moved from the initial point toward the workpiece at a rapid feed rate Example :

Setting

Setting range0 to 999

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 23, 137. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →