What is the setting range of Mazak parameter F1?

0 to 500 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

G61.1 corner deceleration coefficient (%)

Q: What does Mazak parameter F1 do?

F1 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). G61.1 corner deceleration coefficient (%). When (L74/L75) × (F1/100) is assigned as the allowable acceleration attained before corner deceleration is started, the theoretical value Vo of the corner deceleration in G61.1 will be changed to the following Vo’ value: Vo’ = Vo × F1/100 Note : The assigned value is invalid if minus. If 0 is assigned, the deceleration coefficient will be regarded as 100, or if more than 500 is assigned, the deceleration coefficient will be regarded as 500.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

When (L74/L75) × (F1/100) is assigned as the allowable acceleration attained before corner deceleration is started, the theoretical value Vo of the corner deceleration in G61.1 will be changed to the following Vo’ value: Vo’ = Vo × F1/100 Note : The assigned value is invalid if minus. If 0 is assigned, the deceleration coefficient will be regarded as 100, or if more than 500 is assigned, the deceleration coefficient will be regarded as 500.

Setting

Setting range0 to 500

Unit%

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 28, 171. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →