What is the setting range of Mazak parameter F101?

0 to 179 (unit: °). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F101

Spline cancel angle

Q: What does Mazak parameter F101 do?

F101 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Spline cancel angle. If the angle formed by two blocks exceeds the value set by the parameter F101, spline interpolation is not realized in these blocks even in the spline interpolation mode. If F101 = 0 in the spline interpolation mode, the spline interpolation mode is not canceled. In the 5-axis spline interpolation mode, this sets the spline cancel angle at 60 degrees. P2 P1 P1

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Spline cancel angle

If the angle formed by two blocks exceeds the value set by the parameter F101, spline interpolation is not realized in these blocks even in the spline interpolation mode. If F101 = 0 in the spline interpolation mode, the spline interpolation mode is not canceled. In the 5-axis spline interpolation mode, this sets the spline cancel angle at 60 degrees. P2 P1 P1

Setting

Setting range0 to 179

Unit°

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 36, 215. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →