What is the setting range of Mazak parameter F118?

0 to 240000 (unit: mm/min). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F118

Feed rate of the threading runout — Z-axis

Q: What does Mazak parameter F118 do?

F118 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Feed rate of the threading runout – Z-axis. Specify the Z-axial feed rate for the runout of the threading cycle. A quarter (1/4) of the rapid traverse (as set in parameter M1) applies when this parameter is set to zero (0). In case of M1 < F118, the feed rate will be clamped with the M1 value.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Feed rate of the threading runout – Z-axis

Specify the Z-axial feed rate for the runout of the threading cycle. A quarter (1/4) of the rapid traverse (as set in parameter M1) applies when this parameter is set to zero (0). In case of M1 < F118, the feed rate will be clamped with the M1 value.

Setting

Setting range0 to 240000

Unitmm/min

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 37, 225. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →