What is the setting range of Mazak parameter F119?

0 to 240000 (unit: mm/min). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F119

Runout feed rate for the inside diameter threading cycle

Q: What does Mazak parameter F119 do?

F119 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Runout feed rate for the inside diameter threading cycle. Specify the runout feed rate for the inside diameter threading cycle. This parameter is valid only when chamfering is not specified in the inside diameter threading unit of the MAZATROL program. A quarter (1/4) of the rapid traverse (as set in parameter M1) applies when this parameter is set to zero (0). In case of M1 < F119, the feed rate will be clamped with the M1 value.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the runout feed rate for the inside diameter threading cycle. This parameter is valid only when chamfering is not specified in the inside diameter threading unit of the MAZATROL program. A quarter (1/4) of the rapid traverse (as set in parameter M1) applies when this parameter is set to zero (0). In case of M1 < F119, the feed rate will be clamped with the M1 value.

Setting

Setting range0 to 240000

Unitmm/min

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 37, 225. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →