What is the setting range of Mazak parameter F12?

0 to 99999999 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Next block.

PARAMUser parameter · EIA/ISO (F)

F12

Return amount of pecking in drill high-speed deep-hole cycle or in G73

Q: What does Mazak parameter F12 do?

F12 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Return amount of pecking in drill high-speed deep-hole cycle or in G73. Return amount of pecking in drill high-speed deep-hole cycle or in G73 tool path

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Return amount of pecking in drill high-speed deep-hole cycle or in G73 tool path

Setting

Setting range0 to 99999999

Unit0.001 mm/0.0001 in

Program typeM, E

Takes effectNext block

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 28, 174. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →