What does Mazak parameter F120 do?

F120 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Clamping speed for the threading cycle – X-axis. Specify the X-axial clamping speed for the threading cycle.

What is the setting range of Mazak parameter F120?

0 to 99999999 (unit: mm/min). A changed value takes effect: Immediate.

‹ALARMSMazatrol Assistant

PARAMUser parameter · EIA/ISO (F)

F120

Clamping speed for the threading cycle — X-axis

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Clamping speed for the threading cycle – X-axis

Specify the X-axial clamping speed for the threading cycle.

Setting

Setting range0 to 99999999

Unitmm/min

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 37, 225. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →