What does Mazak parameter F123 do?

F123 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). 5 bit settings.

Which bits does Mazak parameter F123 have?

Bit 1: Processing of work offset specified with G53.1 for the machine whose table rotary axis is not an axis that rotates around the Z-axis on the INTEGREX type (the machine specification featuring both the tool rotary axis and the table rotary axis) Bit 2: Shape drawing: Validity of a mirroring command specified in the M CODE unit Bit 3: MDI tool change enable/disable for tools with no tool data Bit 5: Execution of the workpiece axis offset in association with Z-axis feed in the hobbing mode independently of hobbing axis rotating status Bit 7: EIA conversion sequence number output

‹ALARMSMazatrol Assistant

PARAMUser parameter · EIA/ISO (F)

F123

EIA/ISO bit settings (5 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — F123 is set bit by bit

bit 1
Processing of work offset specified with G53.1 for the machine whose table rotary axis is not an axis that rotates around the Z-axis on the INTEGREX type (the machine specification featuring both the tool rotary axis and the table rotary axis)
Processing of work offset specified with G53.1 (tool axis direction control) for the machine whose table rotary axis is not an axis that rotates around the Z-axis on the INTEGREX type (the machine specification featuring both the tool rotary axis and the table rotary axis) 0: Includes a holder length. 1: Does not include a holder length.
Range 0, 1 · Takes effect: Immediate
bit 2
Shape drawing: Validity of a mirroring command specified in the M CODE unit
Consideration of a mirroring command specified in the M CODE unit for shape drawing 0: Not considered 1: Considered
Range 0, 1 · Takes effect: Immediate
bit 3
MDI tool change enable/disable for tools with no tool data
Enables/disables tool change operation in the MDI mode for tools whose tool data has not been set, when bit 7 of parameter F84 is set to “1”. 0: Stop operation with the alarm 953 TOOL DATA INPUT PROCESS ERROR displayed 1: Single block stop after completing tool change with the alarm 1107 INCOMPLETE TOOL DATA displayed Note : 1. When bit 7 of parameter F92 is set to “1”: The above mentioned alarm will be generated if the tool diameter is not set for the specified tool. 2. When bit 3 of parameter F93 is set to “1”: The above mentioned alarm will be generated if the tool diameter, tool diameter A/B, or tool set X/Y is not set for the
Range 0, 1
bit 5
Execution of the workpiece axis offset in association with Z-axis feed in the hobbing mode independently of hobbing axis rotating status
The workpiece axis offset in association with Z-axis feed during hobbing is executed 0: In the hobbing (G114.3) mode and only while the hobbing axis is rotating. 1: Disregarding whether the hobbing axis is rotating or not as long as the current mode is the hobbing (G114.3) mode.
Range 0, 1 · Takes effect: Immediate
bit 7
EIA conversion sequence number output
Sets the output position of sequence numbers during EIA conversion. 0: Output the sequence number after completing machining with each tool sequence/shape sequence and immediately before the first tool change command 1: Output the sequence number after completing machining with each tool sequence/shape sequence
Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 37, 226, 227. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →