What is the setting range of Mazak parameter F126?

0 to 99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F126

Maximum wear offset setting with the input error prevention function enabled

Q: What does Mazak parameter F126 do?

F126 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Maximum wear offset setting with the input error prevention function enabled. When the absolute value of the value input for the following data exceeds the setting of this parameter, either a window prompting a check on the input value is displayed or the input value is discarded with an alarm generated, according to the setting of F95 bit 4. TOOL DATA: WEAR COMP. TOOL OFFFSET: WEAR COMP. [Related parameters] F81 bit 7: Input error prevention function valid/invalid F95 bit 4: Wear offset check scheme with the input error prevention

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

When the absolute value of the value input for the following data exceeds the setting of this parameter, either a window prompting a check on the input value is displayed or the input value is discarded with an alarm generated, according to the setting of F95 bit 4. TOOL DATA: WEAR COMP. TOOL OFFFSET: WEAR COMP. [Related parameters] F81 bit 7: Input error prevention function valid/invalid F95 bit 4: Wear offset check scheme with the input error prevention

Setting

Setting range0 to 99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 37, 228. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →