What is the setting range of Mazak parameter F128?

0 to 3600000 (unit: 0.0001°). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F128

5-axis spline interpolation angular error, 5-axis fairing angular error

Q: What does Mazak parameter F128 do?

F128 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). 5-axis spline interpolation angular error 5-axis fairing angular error. During rotary axis checking in the 5-axis spline interpolation mode, if the error between the line that connects the start point and the end point and the spline curve is larger than the value of F128, the shape of the curve will be modified to reduce the error below the value of F128. When F128 is set to 0, the angular spline shape will not be modified. Angle  Start point angle During rotary axis checking in the 5-axis fairing mode, if the error between the point after fairing and the command point is larger than the value of F128, the point after fairing will be modified to reduce the error below the value of F128. When F128 is set to 0, the point after fairing will not be modified. Angle

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

5-axis spline interpolation angular error 5-axis fairing angular error

During rotary axis checking in the 5-axis spline interpolation mode, if the error between the line that connects the start point and the end point and the spline curve is larger than the value of F128, the shape of the curve will be modified to reduce the error below the value of F128. When F128 is set to 0, the angular spline shape will not be modified. Angle  Start point angle During rotary axis checking in the 5-axis fairing mode, if the error between the point after fairing and the command point is larger than the value of F128, the point after fairing will be modified to reduce the error below the value of F128. When F128 is set to 0, the point after fairing will not be modified. Angle

Setting

Setting range0 to 3600000

Unit0.0001°

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 37, 229. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →