What is the setting range of Mazak parameter F129?

0 to 2000 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F129

5-axis spline interpolation corner deceleration coefficient

Q: What does Mazak parameter F129 do?

F129 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). 5-axis spline interpolation corner deceleration coefficient. Corner deceleration in the 5-axis spline interpolation mode is changed to the following Vo’ with respect to the theoretical value Vo. Vo’ = Vo × F129/100 The assigned value is invalid if minus. If 0 is assigned, it will be regarded as 100, or if a value greater than 2000 is assigned, it will be regarded as 2000.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Corner deceleration in the 5-axis spline interpolation mode is changed to the following Vo’ with respect to the theoretical value Vo. Vo’ = Vo × F129/100 The assigned value is invalid if minus. If 0 is assigned, it will be regarded as 100, or if a value greater than 2000 is assigned, it will be regarded as 2000.

Setting

Setting range0 to 2000

Unit%

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 229. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →