What is the setting range of Mazak parameter F13?

0 to 99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Next block.

PARAMUser parameter · EIA/ISO (F)

F13

Allowance amount of rapid-feed stop in deep-hole drilling cycle or in G83/G283

Q: What does Mazak parameter F13 do?

F13 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Allowance amount of rapid-feed stop in deep-hole drilling cycle or in G83/G283. The allowance amount provided for the tool to stop moving at rapid-feed just in front of the preceding hole during a deep-hole drilling cycle or during G83/G283 tool path

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The allowance amount provided for the tool to stop moving at rapid-feed just in front of the preceding hole during a deep-hole drilling cycle or during G83/G283 tool path

Setting

Setting range0 to 99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectNext block

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 28, 174. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →