What is the setting range of Mazak parameter F130?

0 to 500 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F130

5-axis spline interpolation arc-clamping speed coefficient

Q: What does Mazak parameter F130 do?

F130 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). 5-axis spline interpolation arc-clamping speed coefficient. Arc radius clamping speed in the 5-axis spline interpolation mode is changed to the following Vc’ with respect to the theoretical value Vc. Vc’ = Vc × (F130/100) The assigned value is invalid if minus. If 0 is assigned, it will be regarded as 100, or if a value greater than 500 is assigned, it will be regarded as 500.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Arc radius clamping speed in the 5-axis spline interpolation mode is changed to the following Vc’ with respect to the theoretical value Vc. Vc’ = Vc × (F130/100) The assigned value is invalid if minus. If 0 is assigned, it will be regarded as 100, or if a value greater than 500 is assigned, it will be regarded as 500.

Setting

Setting range0 to 500

Unit%

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 38, 230. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →