What is the setting range of Mazak parameter F136?

–99999999 to 99999999 (unit: 0.1 mm/0.01 in). A changed value takes effect: Immediate.

PARAMUser parameter · EIA/ISO (F)

F136

Amount of offset for dummy workpiece shape on the VIRTUAL MACHINING or 3D MONITOR display

Q: What does Mazak parameter F136 do?

F136 is a User parameter in the EIA/ISO group of the MAZATROL SmoothX control (INTEGREX e-670H). Amount of offset for dummy workpiece shape on the VIRTUAL MACHINING or 3D MONITOR display. It is possible to change the size of the workpiece created automatically on the VIRTUAL MACHINING or 3D MONITOR display. Y Workpiece automatically set by NC This offset function is valid for both

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

It is possible to change the size of the workpiece created automatically on the VIRTUAL MACHINING or 3D MONITOR display. Y Workpiece automatically set by NC This offset function is valid for both

Setting

Setting range–99999999 to 99999999

Unit0.1 mm/0.01 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 38, 230. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →